User's Manual

DragonWave Inc.
50
Horizon Compact Plus Release 1.0.1 Wireless Ethernet Product User Manual – Volume 4
ECFM CLI Command
Description
set ecfm associate vlan-id
Associate a list of Vlan-Ids to a Primary Vlan.
Sequence:
set ecfm associate vlan-id {vlan-id | vlan-list} primary-vlan-id
<vlan-id(1-4094)> press Enter
Where
associate vlan {<vlan-id(1-4094)> | vlan-list specifics a Vlan ID or
a list of Vlan IDs to which Primary Vlan ID must be associated.
primary-vlan-id idenfies Primary Vlan ID.
Example:
set ecfm associate 1001,1002,1003,1004 primary-vlan-id 1071
The system responds:
< no response >
The system returns to the prompt ->.
save ecfmmib
Perform this command to save ecfm settings to FLASH. This
command does not restart the system and does not put any new
settings into effect.
Sequence:
save ecfmmib press Enter
The system responds:
Warning: This command could take up to 4 minutes to finish.
Mib saved successfully.
Note:
To save ecfm settings, ecfm must be ‘on’ status. If ecfm is in ‘off’
status, no ecfm setting will be saved into the Flash.