User's Manual

DragonWave Inc.
48
Horizon Compact Plus Release 1.0.1 Wireless Ethernet Product User Manual – Volume 4
ECFM CLI Command
Description
set ecfm ccm-unicast-mac
This is an Y.1731 command. Sets the destination mac-address for
ecfm unicast Continuity Check Messages.
Sequence:
set ecfm ccm-unicast-mac [aa:bb:cc:dd:ee:ff] press Enter
The system responds:
< no response >
The system returns to the prompt ->.
set ecfm cc level
Sets parameter (CCM Interval) for continuity check messages
(CCMs).
The level ID and Vlan ID identifies the Service (Maintenance
Association) to which the configuration applies.
Sequence:
set ecfm cc level {<level-id(0-7)> | level-list} {<default > | [vlan
{<vlan-id(1-4094)> | vlan-list}] [interval {ten-sec | one-min | ten-
min}]} press Enter
Where
level {<level-id(0-7) identifies the maintenance domain’s level.
Range is from 0 to 7.
level-list identifies a list of levels.
vlan {<vlan-id(1-4094)> specifics a Vlan ID.
vlan-list identifies a list of Vlan IDs.
interval identifies the time between CCM transmissions. The default
interval is ten-sec. The following are the possible values:
ten-sec
one-min
ten-min
The system responds:
< no response >
The system returns to the prompt ->.