User's Manual

Link Layer Discovery Protocol (LLDP)
47
Horizon Compact Plus Release 1.0.1 Wireless Ethernet Product User Manual – Volume 4
ECFM CLI Command
Description
set ecfm mep-capability
level
This is an Y.1731 command. Enable (on) or disable (off) the
capabilities of all the MEPs in a MA at the level and vlan. Defaults to
enable if on/off not specified.
Sequence:
set ecfm mep-capability level {<level-id(0-7)> | level-list} [on|off]
[vlan {<vlan-id(1-4094)> | vlan-list}]([ping] [muliticast-ping]
[turnaround-delay] [rdi]) press Enter
Where
level {<level-id(0-7) identifies the maintenance domain’s level.
Range is from 0 to 7.
level-list identifies a list of levels.
[on|off] is to enable(on) or disable(off) the MEP’s capabilities.
vlan {<vlan-id(1-4094)> specifics a Vlan ID.
vlan-list identifies a list of Vlan IDs.
ping identifies that the loopback(ping) capability is enabled or
disabled. The default capabilities include ping.
multicast-ping identifies that the multicast loopback(ping) capability
is enabled or disabled.
turnaround-delay identifies that the two-way frame delay
measurement capability is enabled or disabled.
rdi identifies that the remote defect indication capability is enabled or
disabled. The default capabilities include rdi.
Example:
set ecfm mep level 7 mpid 70 1071 active press Enter
then
set ecfm mep-capability level 7 vlan 1071 ping multicast-ping
turnaround-delay rdi press Enter
To verify the setting, run the command:
get ecfm maintenance-points local detail mpid 70
MPID: 70 MdLevel: 7 VLAN: 1071 Dir: Down
------------------------------------------------
Out-Of-Service : Disabled
RDI Capability : Enabled
Loopback Capability : Enabled
Multicast LBM Reception Capability : Enabled
Multicast TST Reception Capability : Disabled
One-Way DM Reception Capability : Disabled
DMR Optional Fields : Enabled
Delay Threshold : -
AIS Capability : Disabled
AIS Condition : Disabled
LCK Condition : Disabled
LCK Client Mac Address : 00:00:00:00:00:00
AIS Client Mac Address : 00:00:00:00:00:00
Near-End Loss Threshold : -
Far-End Loss Threshold : -