User's Manual

Link Layer Discovery Protocol (LLDP)
41
Horizon Compact Plus Release 1.0.1 Wireless Ethernet Product User Manual – Volume 4
ECFM CLI Command
Description
set ecfm traceroute cache
Enables Linktrace replies (LTR) caching.
The default: it is disabled.
Sequence:
set ecfm traceroute [on | off] press Enter
The system responds:
< no response >
The system returns to the prompt ->.
To verify the setting, run the command:
get ecfm global information press Enter
The system responds: (Example)
…..
Traceroute Cache
------------------------
Status : Enabled
Size : 200 entries
Hold-time : 150 minutes
set ecfm traceroute
cachesize
Sets maximum size for the Linktrace reply (LTR) table. Traceroute
caching should be enabled and cache should be empty.
The default :
Sequence:
set ecfm traceroute cachesize {default | <integer(1-4095)> }
press Enter
The system responds:
< no response >
The system returns to the prompt ->.
Example:
See the example in the command – set ecfm traceroute cache.
set ecfm traceroute cache
holdtime
Sets Linktrace replies (LTR Table) maximum age.
The default : hold time is 100 minutes.
Sequence:
set ecfm traceroute holdtime {default | integer(1-65535)} press
Enter
The system responds:
< no response >
The system returns to the prompt ->.
Example:
See the example in the command – set ecfm traceroute cache .