User's Manual

DragonWave Inc.
40
Horizon Compact Plus Release 1.0.1 Wireless Ethernet Product User Manual – Volume 4
ECFM CLI Command
Description
set ecfm mep crosscheck
start-delay
To configure the number of CCMs to be missed, for which a device
waits for the remote maintenance end points (MEPs) to come up.
The default: the number is reset to the default value of 3.
Sequence:
set ecfm mep crosscheck start-delay {default} | {start-delay<3-
100>} press Enter
The system responds:
< no response >
The system returns to the prompt ->.
Example:
set ecfm mep crosscheck start-delay 20 press Enter
To verify the setting, run the command:
get ecfm global information press Enter
The system responds: (Example)
->get ecfm global information
Configured OUI : 00:07:58
ecfm Status : Started, Enabled
MIP CCM Database
---------------------------
Status : Enabled
Size : 1000 entries
Hold-time : 24 hours
Traceroute Cache
------------------------
Status : Enabled
Size : 200 entries
Hold-time : 150 minutes
MIP Creation Dynamic Evaluation : Enabled
Cross-Check Delay : 10
Enabled Traps
-------------
None