User's Manual

Link Layer Discovery Protocol (LLDP)
39
Horizon Compact Plus Release 1.0.1 Wireless Ethernet Product User Manual – Volume 4
ECFM CLI Command
Description
set ecfm default-domain
global
Defines or deletes a connectivity fault management (CFM)
Maintenance Domain (MD) at a particular maintenance level and
puts the device in Ethernet CFM configuration mode, where
parameters specific to the maintenance domain can be set.
Sequence:
set ecfm default-domain global levelid <(0-7)> press Enter
Where
levelid identifies the maintenance domain’s level. Range is from 0 to
7.
The system responds:
< no response >
The system returns to the prompt ->.
Example:
set ecfm default-domain global levelid 7 press Enter
To verify the setting, run the command:
get ecfm default-domain press Enter
The system responds: (Example)
Default-domain parameters
--------------------------
Level : 7
MIP Creation Criteria : none
SenderId Permission : none
……