User's Manual

DragonWave Inc.
38
Horizon Compact Plus Release 1.0.1 Wireless Ethernet Product User Manual – Volume 4
ECFM CLI Command
Description
set ecfm default-domain
vlan
Sets the parameters of default Maintenance Domain (MD) Level, to
control MHF creation at the VLAN Ids which are not attached to any
Service (Maintenance Association) and SenderID TLV transmission
by those MHFs.
Sequence:
set ecfm default-domain vlan <integer(1-4094)> ([level<integer(0-
7)>][mip-creation-criteria {none | explicit | defer |
default}][sender-id-permission {none |chassis | manage |
chassis-mgt-address | defer }]) press Enter
Where
vlan identifies a Vlan ID. Range of the integer values is from 1 to
4094
level identifies the maintenance domain’s level. Range is from 0 to 7.
mip-creation-criteria identifies value indicating, whether the
management entity is able to create MHF for this default domain.
The following values are allowed:
none
explicit
defer
default
sender-id-permission identifies the value indicating, if anything is to
be included in the sender ID TLV transmitted by the MIP created by
the default Maintenance Domain. The following are the possible
values:
none
chassis
manage
chassis-mgt-address
defer
The system responds:
< no response >
The system returns to the prompt ->.
To verify the setting, run the command:
get ecfm default-domain press Enter
The system responds: (Example)
Default-domain parameters
--------------------------
Level : 0
MIP Creation Criteria : none
SenderId Permission : none
--------------------------------------------------------------------------------
Vlan Level Status MIP-Creation criteria SenderId Permission
--------------------------------------------------------------------------------
1006 6 No MA default chassis-mgt