User's Manual

Link Layer Discovery Protocol (LLDP)
27
Horizon Compact Plus Release 1.0.1 Wireless Ethernet Product User Manual – Volume 4
set ecfm mep crosscheck
✓
✓
4.2 ECFM Configuration Examples
Figure 4-1, Figure 4-2 and Figure 4-3 represent typical networks, which include Horizon Compact Plus
wireless Ethernet links. The following configuration examples show how to configure ECFM in each of
the Horizon Compact Plus nodes and refer to the parameters shown in the noted figures. Note that
levels, mpid’s and vlan ID’s values shown in the examples are example values only. The values actually
used will depend on the network to which you are connected.
Figure 4-1
ECFM Configuration Example 1
Configuring ECFM – Step 3
ECFM Commands
802.1ag
Y.1731
Define local MEPs and MIPs
Note:
The sequence, below, must be
followed in this step:
1. Local MEP
2. Features with this MEP
set ecfm mep level
✓
✓
set ecfm mep-capability level
✓
set ecfm ccm-unicast-mac
✓
set ecfm mip level
✓
✓
Configuring ECFM – Step 4
ECFM Commands
802.1ag
Y.1731
Define interval, and Start CCM
transmitting.
set ecfm cc level
✓
✓
set ecfm cc enable
✓
✓