User's Manual

DragonWave Inc.
26
Horizon Compact Plus Release 1.0.1 Wireless Ethernet Product User Manual – Volume 4
4.1 Steps to Configuring ECFM
There are four steps to configuring ecfm. Each step comprises the issuing of a number of CLI “set”
commands. Some of these commands must be entered in a specific order for the configuration to be
successful.
The following table shows the steps and also indicates which commands within those steps relate to
802.1 ag and Y.1731.
Configuring ECFM – Step 1
ECFM Commands
802.1ag
Y.1731
ECFM Global Setting
set ecfm on
✓
✓
set ecfm y1731 on
✓
set ecfm port 1 on
✓
✓
set ecfm oui aa:bb:cc
✓
✓
set ecfm error-log on
✓
set ecfm start
✓
✓
set ecfm mep crosscheck start-
delay
✓
✓
set ecfm traceroute cache on
✓
✓
set ecfm traceroute cachesize
✓
✓
set ecfm traceroute cache holdtime
✓
✓
set ecfm mip ccm-database
caching
✓
✓
set ecfm mip ccm-database size
✓
✓
set ecfm mip ccm-database
holdtime
✓
✓
set ecfm associate vlan-id
✓
✓
Configuring ECFM – Step 2
ECFM Commands
802.1ag
Y.1731
Define Domain, Service, and MEPs
Note:
The sequence, below, must be
followed in this step:
1. Domain
2. Domain feature (archive-hold-
time, mip-creation-criteria)
3. Service within the domain
4. Remote MEPs within the service
set ecfm default-domain vlan/global
✓
✓
set ecfm domain DOMAIN-ONE
✓
✓
set ecfm mip-creation-criteria
✓
✓
set ecfm mep archieve-hold-time
✓
✓
set ecfm service
✓
✓
set ecfm mep crosscheck
✓
✓
set ecfm domain DOMAIN-TWO
✓
✓
set ecfm mep archieve-hold-time
✓
✓
set ecfm service
✓
✓