User's Manual

DragonWave Inc.
22
Horizon Compact Plus Release 1.0.1 Wireless Ethernet Product User Manual – Volume 4
3.1.2 Interfacing Commands
Command
Description
set lldp interface admin {switchport <port-num>
{transmit | receive} {on | off}}
Sets LLDP admin status on an interface to
Transmit or Receive.
set lldp interface notification {switchport <port-
num> } {[remote-table-chg][mis-configuration] | off }
Enables/Disables LLDP trap notification on an
interface.
set lldp interface tlv-select basic-tlv {switchport
<port-num> } {[port-descr] [sys-name] [sys-descr]
[sys-capab] [mgmt-addr {all | ipv4 | ipv6
<ip6_addr>}]} {on | off }
Enables the basic Type–Length–Value (TLV)
transmission on a given port.
set lldp interface port-id-subtype {switchport <port-
num>} { if-alias | port-comp <string(255)> | mac-
addr | if-name | local <string(255)>}
Configures lldp port id subtype and port id value.
set lldp interface tlv-select dot1tlv {switchport <port-
num>} {[port-vlan-id] [protocol-vlan-id {all |<vlan-
id>}] [vlan-name {all | <vlan-id>}]} {on | off}
Configure dot1 TLV types on a port.
set lldp interface tlv-select dot3tlv {switchport <port-
num>} { [macphy-config] [link-aggregation] [max-
framesize] } {on | off}
Configure dot3 TLV types on a port.
3.1.3 Show Commands
Command
Description
get lldp global information
Displays LLDP global configuration details.
get lldp interface [switchport <portNum>]
Displays LLDP configuration details on a particular
interface or all interfaces.
get lldp neighbors [chassis-id <string(255)> port-id
<string(255)>] [<iftype> <ifnum>] [detail]
Displays information about neighbors learnt on an
interface or all interfaces.
get lldp interface traffic [switchport <portNum>]
Displays LLDP counters, including the no. of
frames sent, received, discarded, etc.
get lldp interface local {[switchport <portNum>] |
[mgmt-addr]}
Displays the current switch information that will be
used to populate outbound LLDP advertisements
for a specific interface or all interfaces.
get lldp errors
Displays the information about the errors like
memory allocation failures, queue overflows, table
overflows, etc.
get lldp statistics
Displays the LLDP remote table statistics
information.