User's Manual

Horizon Compact Plus Release 1.0.1 Wireless Ethernet Product User Manual – Volume 4
3.0 Link Layer Discovery Protocol (LLDP)
The LLDP is a protocol used by network devices for advertising their identity, capabilities, and neighbours
on an IEEE 802 local area network. The protocol is formally referred to by the IEEE as Station and Media
Access Control Connectivity Discovery specified in standards document IEEE 802.1AB.
3.1 LLDP Commands
The LLDP command set can be divided into three groups:
Global Commands
Interfacing Commands
Show Commands
Each group of commands is detailed below.
3.1.1 Global Commands
Command
Description
set lldp system {start | stop}
Start LLDP on the system.
set lldp module {on | off}
Enable or Disable LLDP on the system.
set lldp transmit-interval [<seconds(5-32768)>]
Sets the transmission interval (interval at which
LLDP Data Units (LLDPDU) are transmitted) or
sets it to the default value(30 seconds)
set lldp holdtime-multiplier [<value(2-10)>]
Sets the multiplier value (value which is used to
calculate the Time-To-Live for the LLDP
advertisements) or sets it to the default value (4).
set lldp reinitialization-delay [<seconds(1-10)>]
Sets the re-initialization delay (delay time taken by
LLDP to re-initialize on any interface) or sets it to
the default value (2 seconds).
set lldp tx-delay [<seconds(1-8192)>]
Sets the transmit delay (minimum amount of delay
between successive LLDP frame transmissions) or
sets it to the default value (2 seconds).
set lldp notification-interval [<seconds(5-3600)>]
Sets the notification interval (interval at which LLDP
notifications are sent to NMS) or sets it to the
default value (5 seconds).
set lldp chassis-id-subtype {chassis-comp
<string(255)> | if-alias | port-comp <string(255)> |
mac-addr | nw-addr | if-name | local-
cfg<string(255)>}
Configures lldp chassis id subtype and chassis id
value.
clear lldp counters
Clears LLDP transmit and receive statistics.
clear lldp table
Clears LLDP neighbors’ information.