User's Manual

DragonWave Inc.
18
Horizon Compact Plus Release 1.0.1 Wireless Ethernet Product User Manual – Volume 4
Required Action
Steps
get port eoam neighbour
information
Displays EOAM neighbour information.
Sequence:
get port eoam neighbour information [port <1-2>] press Enter
Example:
get port eoam neighbour information press Enter
The system responds:
Port Mac Addr OUI VendorInfo Mode ConfigRev MaxPdu
------- ----------------- -------- ---------- ------- --------- ------
P1 00:07:58:00:e7:86 1c:08:00 01020000 active 1 1518
P2 00:00:00:00:00:00 00:00:00 00000000 unknown 0 0
Port Remote Link UniDir Variable
Loopback Event retrieval
------- --------- ------- ------- ---------
P1 enable enable disable enable
P2 disable disable disable disable
get port eoam fault-
management config
Displays EOAM link event actions and max desciptors per variable
request.
Sequence:
get port eoam fault-management config [port <1-2>] press Enter
The system responds:
-------------------------------------------------------------------
Frame Frame Frame secs Critical Dying Link MaxVar
Port Period Summary Event Gasp Fault Req
------- ------- ------- ---------- -------- ------- ------- ------
P1 warning warning warning warning warning warning 10
P2 warning warning warning warning warning warning 10
get port eoam fault-
management remote-
loopback
Displays EOAM loopback statistics.
Sequence:
get port eoam fault-management remote-loopback [port <1-2>]
[current-session | last-session] [detail] press Enter
Example:
get port eoam fault-management remote-loopback port 1
current-session detail press Enter
The system responds:
Port: P1
Loopback: Remote OAM in loopback mode
Start: 13/05/2009 15:34:19.310
End: Still running
Test pattern: 00005050
Test packet size: 800
Test wait-time: 5
Test packet count: 20
Test statistics:
Test packets Rx: 20
Test packets Tx: 20
Test packets matched: 20