User's Manual

DragonWave Inc.
4
Horizon Compact Plus Release 1.0.1 Wireless Ethernet Product User Manual – Volume 4
Procedure 2-1
Configuring EOAM
Required Action
Steps
login
Log in as a NOC user.
set eoam
Enables or disables Ethernet Operation Administration and
Maintenance (EOAM) processing globally on this device.
The default is "off".
Sequence:
set eoam [on | off] press Enter
The system responds:
< no response >
The system returns to the prompt ->.
Example:
set eoam on press Enter
To verify the setting, run the command – get eoam global information
get eoam global information press Enter
The system responds:
Ethernet OAM has been enabled
OUI configured is 1c:08:00
Error event OAMPDU resend count:1
Where
Enabled means that eoam is on
Disabled means that eoam is off
set eoam oui
Configure the Organization Unit Identifier (OUI).
Sequence:
set eoam oui [xx:yy:zz] press Enter
The system responds:
< no response >
The system returns to the prompt ->.
To verify the setting, run the command – get eoam global information
set eoam oui 00:07:58 press Enter
then
get eoam global information press Enter
The system responds: (Example)
Ethernet OAM has been enabled
OUI configured is 00:07:58
Error event OAMPDU resend count:1