User's Manual

DragonWave Inc.
40
Horizon Compact Plus Release 1.0.1 Wireless Ethernet Product User Manual – Volume 1
Required Action
Steps
Create a new Administrator
account
Sequence:
set admin user press Enter
The system responds:
Index:
Enter the <index #> where <index #> is from 1 to 50 and represents
one of the 50 available accounts.
The system responds:
UserName:
Enter the desired username for this account.
The system responds:
Verify UserName:
Re-enter the desired username for this account.
The system responds:
Password:
Enter the desired password for this account.
The system responds:
Verify Password:
Re-enter the desired password for this account.
The system responds:
User Accepted:
If the usernames or passwords do not match the system will
respond:
nak
Repeat for as many admin accounts as required.
Save the settings
save mib press Enter
The system responds:
MIB saved.
Note: the new account settings must be saved, otherwise they will be
lost after the next system reset. The user must perform the save mib
command in order to save the changes.