User's Manual

DragonWave Inc.
34
Horizon Compact Plus Release 1.0.1 Wireless Ethernet Product User Manual – Volume 1
Required Action
Steps
Configure the radio parameters
This command leads you through the steps to configure the radio band, system
mode and frequency channel.
Sequence:
set radio config press Enter
The system responds:
#Press 'Ctrl-X' to exit config process
#Press 'Enter' to retain previous value
Radio Bands Available in the system :
freqNone fcc18_1_10_R5
fcc18_1_20_R5 fcc18_1_30_R5
fcc18_1_40_R5 fcc18_1_50_R5
test18_1_7_R5 braz18_1_14_R5
braz18_1_28_R5 braz18_1_56_R5
Enter new radio band [fcc18_1_50_R5]:
System modes available in the system :
cw_test hy50_66_qpsk hy50_154_16qam
hy50_198_32qam hy50_241_64qam hy50_285_128qam
hy50_329_256qam hy50_351_256qam
Enter new system mode [hy50_285_128qam]:
Available frequencies for the radio band:
Index TX RF RX RF
1 17765000 19325000
2 17815000 19375000
3 17865000 19425000
4 17915000 19475000
5 17965000 19525000
6 18015000 19575000
7 18065000 19625000
8 18115000 19675000
All Frequency in kHz
Enter programmed frequency [2]:
Would you like to save MIB ? Enter Y(Yes) or N(No):y
Apply the setting to system immediately. This operation may cause the
loss of current connection!
Continue? Enter Y(Yes) or N(No)n
Note: Answering “Yes” (y) to the above request will cause any
changes to take effect immediately and you will not get the prompt
to save mib and reset system.
Save MIB and reset system for changes to take effect.
Radio Band selected :fcc18_1_50_R5
System mode set to :hy50_285_128qam
Save MIB and reset system for changes to take effect.
Programmed frequency selected:
Index TX RF RX RF
2 17815000 19375000
All Frequencies in kHz
Save MIB and reset system for changes to take effect.