User's Manual

Configuring the Time Source (SNTP)
91
Horizon Compact Plus Release 1.0.1 Wireless Ethernet Product User Manual – Volume 2
Procedure 15-1
Configuring the Horizon Time and Date
Required Action
Steps
login
Log in as a NOC user.
View date time
Returns the current date and time on the system.
Sequence:
get date time press Enter
The system responds:
Date and Time : 28/09/2011 14:17:42
Configure date time
Sets the system date and time if SNTP is not enabled.
Sequence:
set date time [dd/mm/yyyy hh:mm:ss:ms] press Enter
Where dd – day (01 – 31)
mm – month (01 – 12)
yyyy – year ( 1970 – 2099)
hh – hour (0 – 23)
mm – minutes (0 – 59)
ss – seconds (0 – 59)
ms – milliseconds (0 – 999)
The system responds:
Date and Time : [dd/mm/yyyy hh:mm:ss:ms]
Save changes to mib
Saves the MIB to RAM. Perform this command save setting changes
to non-volatile memory.
Sequence:
save mib press Enter
The system responds:
MIB saved successfully.