User's Manual

Threshold Alarms
75
Horizon Compact Plus Release 1.0.1 Wireless Ethernet Product User Manual – Volume 2
Required Action
Steps
View dropped frames
threshold alarm settings
Displays the current settings for the Dropped Ethernet Frames
Threshold Alarm. Note that the values for all CoS queues, as well as
the total for the system, are displayed.
Sequence:
get dropped frames threshold press Enter
The system responds:
Tot Q1 Q2 Q3 Q4 Q5 Q6 Q7 Q8
Dropped frames thresholds set to :100 100 100 100 100 100 100 100 100 %
Dropped frames timelimits set to : 10 10 10 10 10 10 10 10 10 secs
Configure total dropped
frames threshold alarm
settings
Sets the values for the total Dropped Ethernet Frames Threshold
Alarm. As the Horizon traffic rate from the LAN side exceeds the
programmed limit, frames are dropped in order to maintain the limit.
Sequence :
set dropped frames threshold <value> <timelimit> press Enter
Where
<value> is the desired total dropped frames value expressed as a
percentage
<timelimit> is the desired time limit over which the condition must
occur before the alarm is raised. Timelimit is in integers, given in
number of seconds. Default value is 10 seconds.
Example : set dropped frames threshold 50 5 press Enter
The system responds:
Bandwidth utilization threshold set to : 50 %
Bandwidth utilization timelimit set to : 5 secs.
get dropped frames threshold press Enter
Tot Q1 Q2 Q3 Q4 Q5 Q6 Q7 Q8
Dropped frames thresholds set to : 50 100 100 100 100 100 100 100 100 %
Dropped frames timelimits set to : 5 10 10 10 10 10 10 10 10 secs