User's Manual

Adaptive Transmit Power Control (ATPC)
61
Horizon Compact Plus Release 1.0.1 Wireless Ethernet Product User Manual – Volume 2
Required Action
Steps
Return the current atpc
configuration
This command displays the current atpc configuration.
Sequence:
get atpc config press Enter
The system responds:
ATPC CONFIGURATION LOCAL PEER
--------------------------------- ------------ ------------
Status : Disabled Disabled
Coordinated Power Offset : 5.0 dBm Disabled
Configure atpc
Enables or disables atpc, enables or disables coordinated power and
provides a coordinated power offset value in dB. Atpc may be invoked
with or without a coordinated power parameter.
set atpc config [on/off] [coord power on/off] [0-10] press Enter
Sequence Example:
set atpc config on on 6 press Enter
System responds:
ATPC CONFIGURATION LOCAL PEER
--------------------------------- ------------ ------------
Status : Enabled Disabled
Coordinated Power Offset : 6.0 dBm Disabled