User's Manual

DragonWave Inc.
14
Horizon Compact Plus Release 1.0.1 Wireless Ethernet Product User Manual – Volume 2
Procedure 4-1
Ethernet Port Configuration
To configure the Ethernet ports use the following procedure:
Required Action
Steps
login
Log in using the Super user or a NOC account.
View current port
configuration
This command displays the current configuration of the ports.
Sequence:
get enet config press Enter
The system responds:
--------------------------------------------------------------------------------------------------------------------------
ETHERNET PORT CONFIGURATION
====================================================================
Enet Port ID :P1
Port Descriptor :AnyName
Auto Negotiation :on
Port Medium :auto
Optical Tx State :on
Pause Frame Enable :off
Speed :auto
Max. Frame Size :1600
Payload State :disable
Admin State :on
Enet Port ID :P2
Port Descriptor :AnyName
Auto Negotiation :on
Speed :auto
Max. Frame Size :1600
Payload State :enable
Admin State :on
Enet Port ID :P3
Port Descriptor :AnyName
Auto Negotiation :on
Speed :auto
Max. Frame Size :1600
Payload State :disable
Port State :off
Admin State :on
Enet Port ID :P4
Port Descriptor :AnyName
Auto Negotiation :on
Speed :auto
Max. Frame Size :1600
Payload State :disable
Port State :off
Admin State :on