User's Manual

Horizon Compact Plus Release 1.0.1 Wireless Ethernet Product User Manual – Volume 2
4.0 Configuring Ethernet Ports 1 and 2
The option is available to independently configure the two physical Data ports, Port 1 and Port 2 as two
100/10 Base-t (Fast Ethernet) ports, or as single 1000/100/10 Base-t (Gigabit) ports. A cable splitter is
required at the hardware input to Port 1 or Port 2 to provide the physical Fast Ethernet connections.
When configured as two Fast Ethenet ports, Port 1 supports ports p1 and p4 and Port 2 supports ports
p2 and p3.
Gb Port
Supported Data Rate
Fast E Port
Supported Data Rate
Port 1
1000/100/10 Base-t
p1
100/10 Base - t
p4
100/10 Base - t
Port 2
1000/100/10 Base-t
p2
100/10 Base - t
p3
100/10 Base - t
The following parameters can be configured for each of the ports:
Parameter
Gb Port 1
Gb
Port 2
Fast
Port 1
Fast
Port 2
Fast
Port 3
Fast
Port 4
Port Description






Auto Negotiation






Media
Copper/Fibre
Copper
Copper
Copper
Copper
Copper
Speed Mbps






Optical Transceiver State

Pause Frame Enable


Maximum Frame Size






Admin State






Port State


All ports can be configured for data or management.