User's Manual

DragonWave Inc.
154
Horizon Compact Plus Release 1.0.1 Wireless Ethernet Product User Manual – Volume 2
CLI Command
Description
set atpc[on|off] [on|off] [0-10]
sets the atpc(on/off) coordinated power option(on/off) and
coordinated power offset value
set bandwidth record logging[on | off]
Set bandwidth logging to both flash and syslog 'on' or 'off'
set bandwidth record thresholds[thresh]
[thresh] [thresh] [thresh] [thresh] [thresh]
[thresh] [thresh] [thresh] [thresh]
set the integer percent utilization thresholds for ten
bandwidth utilization counters. When a bandwidth
utilization sample equals or exceeds the threshold then
each of the associated counters are incremented.
set bandwidth utilization threshold
[threshold] [time limit]
sets the % utilization of bandwidth Threshold. The time
that the threshold must be crossed in order for itbe
considered an alarmable/trappable event is specified by the
user. The default time limit is 10 secs.
set cos default value [0 - 7]
sets the 802.1p priority for untagged packets.
set cos ecfm flow mapping [off|{on
QC|Q1|Q2|Q3|Q4|Q5}]
sets the ECFM flow mapping feature on or off and directs
ECFM packets to the desired queue.
set cos expedite queue [on | off]
Sets the expedite queue to on or off
set cos qinq itag [protocol id]
set the protocol id of dot1q Q_in_Q inner tag.
set cos qinq otag [protocol id]
set the protocol id of dot1q Q_in_Q outer tag.
set cos queue cbs [committed burst size]
sets the committed burst size of the cos queues. Value
ranges from 1% to 100% of total memory.
set cos queue cir [0 - 100, 0 - 100, 0 - 100,
0 - 100]
sets the CIRs for user traffic queues
set cos queue mapping [1/2], ...
assigns the user queue to cos value. Maximum 8
assignments are allowed in a command, one for each
dot1p value.
set cos type [cos_vlan | cos_qinq_itag |
cos_qinq_otag | cos_dscp_ip_v4 |
cos_dscp_ip_v6 | cos_mplsexp]
set the cos type.
set cos wfq weight [weight]
set the cos wfq weight.
set date time [dd/mm/yyyy hh:mm:ss:ms]
sets the calendar date and time on the system. where dd
- day (01 to 31) mm - month (01 - 12) yy - year
(1970 - 2099) hh - hour (0 - 23) mm - minute (0 - 59)
ss - second (0 - 59) ms - millisec (0 - 999)
set default gateway [abc.def.ghi.jkl]
sets the system default gateway.
set dropped frames threshold [threshold]
[time limit]
sets the threshold limit (in %) for dropped frames. The
time that the threshold must be crossed in order for itbe
considered an alarmable/trappable event is specified by the
user. The default time limit is 10 secs.
set dw access[on | off]
set dragonwave access in secure password environment.
set dynamic config change
enables the system to allow “on-the-fly” changes of certain
parameters without having to reset the system. set radio
config, set ip config, set network management interface, set
van tag.