User's Manual

Detailed CLI Command List
145
Horizon Compact Plus Release 1.0.1 Wireless Ethernet Product User Manual – Volume 2
CLI Command
Description
diagnose haam [up/down]
enable Hitless Adaptive Modulation(HAAM) diagnostic
mode [up|down]
downgrade system licensed speed
downgrade system licensed speed [speed decrement]
ecfm frame delay [start | stop] type {one-
way | two-way }level <level-id(0-7)> [vlan
<vlan-id(0-7)>] [port <port-num>] [direction
{inward | outward}]{mepid <mpid(1-8191)> |
mac <aa:aa:aa:aa:aa:aa>}
[count<num_of_observations(1-8192)>]
[interval <milliseconds(10-10000)>]
[deadline <seconds(1-172800)>]
[switchname <context_name>]]
Start or Stop the ECFM delay measurement calculations.
Default is to start the measurement.
ecfm ping ethernet mac
{<aa:bb:bb:bb:bb:bb> | multicast } {domain
<domain-name(1..20)> | level <level-id(0-
7)>} [vlan <vlan-id(1-4094)>] [interface
<interface-number>] [direction {inward |
outward}] [data-pattern <string> | test-
pattern null-signal-without-crc | null-signal-
with-crc | prbs-without-crc | prbs-with-crc]
[size <pdu-size(64-1400)> | variable-
bytes][interval <milliseconds(1-600000)>]
[count <num_of_msgs(1-8192)>] [deadline
<seconds(1-172800)>] [switch
<string(32)>]
Send unicast or multicast Loopback messages. The first
byte in the unicast address cannot be 0x01 or 0xFF.
ecfm ping ethernet mpid <id> {domain
<domain-name(1..20)> | level <level-id(0-
7)>} [vlan <vlan-id(1-4094)>] [interface
<interface-number>] [direction {inward |
outward}] [data-pattern <string> | test-
pattern null-signal-without-crc | null-signal-
with-crc | prbs-without-crc | prbs-with-crc]
[size <pdu-size(64-1400)> | variable-
bytes][interval <milliseconds(1-600000)>]
[count <num_of_msgs(1-8192)>] [deadline
<seconds(1-172800)>] [switch
<string(32)>]
Send unicast or multicast Loopback messages.
ecfm traceroute ethernet mac
<aa:aa:aa:aa:aa:aa> {domain <domain-
name(1..20)> | level <level-id(0-7)>} [vlan
<vlan-id(1-4094)>] [time-to-live <ttl-value(1-
255)>]
Initiate Linktrace message by providing the MAC Address
of the MEP or MIP.
ecfm traceroute ethernet mpid <id>
{domain <domain-name(1..20)> | level
<level-id(0-7)>} [vlan <vlan-id(1-4094)>]
[time-to-live <ttl-value(1-255)>]
Initiate Linktrace message by providing MEPID of the
destination MEP of the MEP or MIP.
erase log
erase all of log entries in the flash.
erase performance log
erase all of the performance log entries.
exit
allows the user to exit from Telnet Session.