User's Manual

DragonWave Inc.
130
Horizon Compact Plus Release 1.0.1 Wireless Ethernet Product User Manual – Volume 2
Required Action
Steps
FOR SNMP v1 or v2c ONLY
View snmp managers
Displays a list of managers that can access the system via SNMP v1
and v2c only.
Sequence:
get snmp managers press Enter
The system responds:
Mgr # IpAddress CommunityString
1 192.168.1.133 example text1
2 192.168.1.100 example text2
If there are no managers specified, the system responds:
No managers configured for the system.
Configure snmp manager
[mgr#] [ip address]
[enable/disable] [community
string]
Specifies the SNMP managers to allow access to the system, v1 and
v2c only.
Sequence:
set snmp manager [mgr#] [ip address] [enable/disable]
[community string] press Enter
The system responds:
Mgr# IpAddress Status CommunityString
1 192.7.1.1 disabled public
2 0.0.0.0 disabled public
3 0.0.0.0 disabled public
4 0.0.0.0 disabled public
5 0.0.0.0 disabled public
6 any disabled public
Notes:
1. Only maximum of 5 managers are allowed. If all the managers are
filled in, remove 1 manager by overwriting the particular index.
2. By setting the IP address of last index to 'any' and 'enable',
anybody can have access to the system via SNMP.