User's Manual

System Management
109
Horizon Compact Plus Release 1.0.1 Wireless Ethernet Product User Manual – Volume 2
17.5.6 Graphics and Table View
On the Link View Bar are the Link View buttons. A real time table of system status is displayed when you
click on the Table button. The number of rows in the table will reflect the number of systems involved in
the link (e.g. 2 rows for a basic link, 4 rows for a fully redundant link). All of the fields in the table are
updated dynamically. When a field value changes the text colour changes to blue for a one second
period. This draws the user’s attention to changing values. The RSL, SNR and Eb/No values are
examples of parmeters that may change frequently. Each cell in the table has a clickable hyperlink that
displays the relevant configuration detail that manages that component in place of the Information Pane
(see Figure 17-2). Clicking on the Graphic button shows a graphical representation of the radio link.
Clicking on the Both button places both the Table and the Graphic features on the screen (see Figure
17-3).
Figure 17-3 Web Interface – Graphics withTable View
Clicking on the Managed Node buttons allows you to select the local, or peer, node for management.
This is valid for both the graphics view and with no graphics displayed. Also, clicking on the local (left
hand) or peer (right hand) node icons selects that node for management. Figure 17-3 shows the left hand
node is being managed with the node icon surrounded by a box and the ip address highlighted. The
arrows shown ingressing and egressing the node icons indicate the status of connectivity between the
nodes. Green arrows indicate that modem blocks are being successfully transmitted/received (sync). Red
arrows indicate a failure to transmit/receive modem blocks (no sync).