Product Manual

79 Appendix C – Command Line Interface (CLI)
79
Complete List of CLI Commands
This section shows a complete list of CLI commands. This document uses the following
conventions to describe commands:
• <filename> or [newoldboth] - replace bolded information in
brackets with the correct entry
• message — system responses and messages are shown in italics
• press Enter – instructs you to press the Enter key on your keyboard.
• NAK – system response indicating that the system cannot process the
request. Repeat the action.
There are three keying features that simplify typing the commands. These features are:
• tab key - When you type the first few characters of a unique command
you can press the tab key and the system fills in the rest of the command
if there is a unique matching command. For example, when you type “get
authentication s”, press tab and the system automatically fills in the rest of
the “get authentication status” command.
• Enter key – To execute a command, press Enter.
• <esc> key – To abort a command, press the <esc> key.
• <ctrl>+c – To abort a command, press the <ctrl>+c.
• arrow keys – Use the arrow keys at the command line interface to scroll
through the previous 20 issued commands.
Version 2.0