Product Manual

75 Appendix C – Command Line Interface (CLI)
75
reset system Resets the system to save the settings to FLASH and restart the
system with the new settings taking effect.
Sequence:
reset system press Enter
The system responds:
system reset.
get leds Displays the system LEDS with their ON/OFF values.
Sequence:
get leds press Enter
The system responds:
Ethernet Link Status LED : [on | off]
Ethernet Traffic LED : [on | off]
Ethernet Full Duplex Mode LED : [on | off]
System Trouble LED : [on | off]
Power LED : [on | off]
modem Sync LED : [on | off]
RF On LED : [on | off]
Antenna Alignment : [0 – 100] %
Note: The value of the multi-segment antenna alignment LED is
given in percent.
Version 2.0