Product Manual

42 DragonWave Inc.
Figure 9
24 GHz system with 36” antenna mounted
Procedure 6-4
Connecting the IF and RS-232 cable to the modem and radio
Perform this procedure to connect the IF and RS-232 cable to the modem and radio.
Connect IF cable to the IF connector on the modem and the radio.
Connect the RS-232 cable to the serial connector on the modem and the radio.
Note: Do NOT connect the Power cable or the CAT5 Ethernet cable to LAN equipment at this
time.
Caution
Lightning protection is required by the DragonWave
AirPair 100 UL 24 GHz Product Manual