Product Manual

Table of Contents
v
List of Procedures
Procedure 4-1 Configuring the Serial Port using the CLI 15
Procedure 4-2 Create Login Account 18
Procedure 4-3 Set AirPair Frequency available and Transmit Power 20
Procedure 4-5 Setting the IP Address 28
Procedure 4-6 Setting VLAN Tag 31
Procedure 6-1 Mounting the 12″ antennas 35
Procedure 6-2 Visually align the radios 37
Procedure 6-3 Attaching the Modem to Mounting Bracket 38
Procedure 6-4 Connecting the IF and RS-232 cable to the modem and radio 42
Procedure 6-5 Connect the power cable to the modem and the power pack 44
Procedure 6-6 Fine-adjust Align Radios 48
Procedure 6-7 Perform a data test 50
Procedure 7-1 Setting up SNMP 51
Procedure 7-2 Enable traps 53
Procedure C - 1 Configure the serial port 65
Version 2.0