Product Manual

Installation of Radio and Modem
37
6.2. Visually-aligning Radios
This section describes how to visually align the radios.
Procedure 6-2
Visually align the radios
Figure 3
Use of Visual Alignment Tool
Using the visual alignment tool, as
accurately as possible align the radios to
each other.
The beamwidth of the signal is 2 degrees,
which is approximately equivalent of the
width of a thumb when the arm is fully
extended. Align as closely to the center of
the 2 degree beamwidth as possible.
Visually align one end of the point-to-point
link then the other.
Place a mark on the radio bracket to
identify the starting point before fine
alignment begins.
Visual Alignment Tool Visual Alignment Tool in use
Version 2.0