Product Manual

114 DragonWave
Command Steps
set snmp manager
[mgr#] [ip address]
[enable/disable]
[community string]
Adds an SNMP manager to the list of allowed SNMP managers of
the system. The default state is disable. The default community
string is public.
Sequence:
set snmp manager [mgr#] [ip address] [enable/disable] [community
string] press Enter
The system responds:
Mgr# IpAddress Status CommunityString
1 192.7.1.1 disabled public
2 0.0.0.0 disabled public
3 0.0.0.0 disabled public
4 0.0.0.0 disabled public
5 0.0.0.0 disabled public
6 any disabled public
Notes:
1. Only maximum of 5 managers are allowed. If all the
managers are filled in, remove 1 manager by overwriting
the particular index.
2. By setting the IP address of last index to 'any' and 'enable',
anybody can have access to the system via SNMP.
set snmp set request
[on/off]
Allows SNMP v1 and v2c ‘Set’ requests. The default is off.
Sequence:
set snmp set request [on/off] press Enter
The system responds:
SNMP Set Requests are [on/off].
AirPair 100 UL 24 GHz Product Manual