Product Manual

110 DragonWave
Command Steps
set date time
[DD/MM/YY
hh:mm:ss:dd]
Sets the calendar date and time on the system.
Sequence:
set date time [DD/MM/YYYY hh:mm:ss:dd] press Enter
where
DD = day of month (range 01 to 31)
MM = month (range 01 to 12)
YYYY = year (minimum 1970)
hh = hour ( range 00 to 23 )
mm = minutes ( range 00 to 59 )
ss = seconds (range 00 to 59)
dd=milliseconds (range 00 to 999)
The system responds:
date time DD/MM/YYYY hh:mm:ss:dd
set default gateway Sets the system's default gateway parameter. The default router
must be an IP address specified in decimal-dot notation, e.g.,
192.168.0.1.
Sequence:
set default gateway [123.123.123.123]press Enter
where
[123.123.123.123] is in decimal-dot notation.
The system responds:
NAK’
If request cannot be processed, otherwise returns the following which
acknowledges completion of the request:
System default gateway: 123.123.123.123
set frequency bank
[go/return]
Sets the available bank of frequencies, for the Tx and Rx
according to the index. Only one bank maybe select at any time.
Sequence:
set frequency bank [go/return]press Enter
The system responds:
[go/return] frequency bank selected.
AirPair 100 UL 24 GHz Product Manual