Product Manual

102 DragonWave
Command Steps
get telnet access Displays the state of Telnet access to the system. The default is
on.
Sequence:
get telnet access press Enter
The system responds:
Telnet access is [on/off].
*** Warning disabling Telnet access will prevent remote
access to AirPair via telnet.
get traffic statistics Displays traffic statistics in the system.
Sequence:
get traffic statistics press Enter
The system responds:
--Interface Card (100BaseT interface):
bytes in,
bytes out,
frames in,
frames out,
frames received in error,
undersized frames received,
oversized frames received,
frames discarded
AirPair 100 UL 24 GHz Product Manual