Product Manual

100 DragonWave
Command Steps
get snmp managers Displays a list of SNMP managers that can access the system via
SNMP.
Sequence:
get snmp managers press Enter
The system responds:
Mgr # IpAddress/ CommunityString
1 192.168.1.133 example text1
2 192.168.1.100 example text2
get snmp set request Displays whether or not SNMP v1 and v2c ‘Set’ requests are
enabled.
The default state is off.
Sequence:
get snmp set requests press Enter
The system responds:
SNMP Set Requests are [on | off].
get snmp trap hosts Displays a list of receivers of SNMP traps.
Sequence:
get snmp trap hosts press Enter
The system responds:
Host# IpAddress Status CommunityString
1 0.0.0.0 disabled public
2 0.0.0.0 disabled public
3 0.0.0.0 disabled public
4 0.0.0.0 disabled public
5 0.0.0.0 disabled public
Notes:
Only maximum of 5 hosts are allowed.
If all the hosts are filled in, remove 1 host by overwriting the
particular index.
AirPair 100 UL 24 GHz Product Manual