Product Manual

97 Appendix C – Command Line Interface (CLI)
97
Command Steps
get radio band Displays the type (band) of radio that the user expects to connect to the
modem.
Sequence:
get radio band press Enter
The system responds:
Currently selected Radio Band :[none/fcc18a/fcc18b/fcc18c/
ic18a/ic18b/ic18c/fcc23a/fcc2
3b/fcc23c/fcc23d/ic23a/ic23b/
fcc28a/fcc28b/china23/un24/e
tsi23a_28/etsi23a_56/
etsi26b_28/etsi26b_56]
Radio Bands Available in the system :
none fcc18a fcc18b fcc18c ic18a ic18b
ic18c fcc23a fcc23b fcc23c fcc23d ic23a
ic23b fcc28a fcc28b china23 un24 etsi23a_28
etsi23a_56 etsi26b_28 etsi26b_56
FCC = United States Federal Communications Commission
IC = Industry Canada
China = China
ETSI = European Telecommunications Standards Institute
UN = Unlicensed
get radio gain Displays the gain for the radio. Note: Gain is not displayed if a
radio has not communicated with the modem.
Sequence:
get radio gain press Enter
The system responds:
Radio Tx gain set to [gain]
Radio Rx gain set to [gain]
Version 2.0