Product Manual

95 Appendix C – Command Line Interface (CLI)
95
Command Steps
get network protocol
strict
Displays whether the AirPair system must be accessed through a
management VLAN (strict is on) or whether devices on the
network can access the system use of a management VLAN
(strict is off).
Note: network access to the AirPair system is protected by
username and password control regardless of the network
protocol strict setting.
The default state is off.
Sequence:
get network interface type press Enter
The system responds:
Network protocol is : [on/off]
get omni file crc Displays the Omni File CRC in the system.
Note: Backup software copies can be duplicates of executing
software. The CRC of a backup file is invalid when the backup file
is not present in FLASH.
Sequence:
get omni file crc press Enter
The system responds:
--Omni File software CRC currently executing in system:
XXXXXXXX
Omni File Backup CRC stored in Flash:
XXXXXXXX
Version 2.0