Product Manual

92 DragonWave
Command Steps
get if status Displays the Transmit (Tx) and Receive (Rx) IF synthesizer lock
status.
Sequence:
get if status press Enter
Where
[lock status] is locked or unlocked
The system responds:
IF Txsynthesizer currently [lock status]
IF Rx synthesizer currently [lock status]
get if statistics Show the IF statistics.
Sequence:
get if statistics press Enter
The system responds:
modem IF statistics:
modem IF Rx Power: –n dBm
Note: IF Power displayed is multiples of 10. For Ex, 132 dBm
implies 13.2 dBm.
get ip address Displays the IP address for the system.
Sequence:
get ip address press Enter
The system responds:
System IP address: [123.123.123.123].
Note: [123.123.123.123] is in decimal dot notation.
AirPair 100 UL 24 GHz Product Manual