User's Manual

DragonWave Inc. 58

AirPair 100 UL 24 GHz Product Manual

Required Action Steps

[communityString]

Sequence:

set snmp trap host [host #] [ipAddress] [enable/disable]

[communityString] press Enter

The system responds:

Host# IpAddress Status CommunityString

1 0.0.0.0 disabled public

2 0.0.0.0 disabled public

3 3.3.3.3 enabled new text string here

4 0.0.0.0 disabled public

5 0.0.0.0 disabled public

Note: A maximum of 5 hosts are allowed. If all the hosts are filled

in, remove 1 host by overwriting the particular index.

get snmp traps Displays the list of traps that are available in the system.

Sequence:

get snmp traps press Enter

The system responds:

Trap# TrapName Enabled(Yes | No)

1 ColdStart No

2 WarmStart No

3 Link down No

4 Link up No

5 Explicit Authentication Failure No

6 AutoNeg Mismatched Duplex No

7 LossOfSignalLockFromDemod No

8 BerThresholdExceeded No

9 Mod PLL lock failure No

10 Mod loss of sync bytes No

11 Mod input FIFO overrun/underrun No

12 Mod input data inactivity No

13 SNR below threshold No

14 PLDRO lost lock No

15 Radio lost comm No

16 Radio mismatch No

17 IF Tx Synth Unlocked No

18 IF Rx Synth Unlocked No

set snmp trap [trapIndex]

[enable/disable]

Sets the SNMP trap and enables or disables it. DragonWave

recommends enabling the LossOfSignalLockFromDemod trap. This

trap indicates loss of communication with the peer AirPair node.