User's Manual

DragonWave Inc. 34
AirPair 100 UL 24 GHz Product Manual
Required Action Steps
set vlan tag [8100XXXX] press Enter
where
XXXX is the two byte tag control
The system responds:
VLAN tagging is [off | on using 8100XXXX]
get vlan tag Displays that the VLAN tagging information for the system is correct. If
you have entered an incorrect VLAN tag, you cannot communicate
remotely with the AirPair.
Sequence:
get vlan tag press Enter
The system responds:
VLAN tagging is [off | on using tag 8100XXXX]
Reset system Resets the system to save the settings to FLASH and restart the
system with the new settings taking effect. If you do not want to restart
the system, use the command save MIB to save the settings to
FLASH.
Sequence:
reset system press Enter
The system responds:
system reset.