User's Manual

DragonWave Inc. 30
AirPair 100 UL 24 GHz Product Manual
Procedure 4-5
Setting the IP Address
Perform this procedure to set the IP address for the system so you can access
the AirPair from your desktop.
Required Action Steps
Login Log in as a NOC user. Only the NOC user is allowed to set the IP
address.
Sequence:
Enter an NOC username:
username: <username> press Enter
Enter an NOC password:
password: <password> press Enter
set ip address Set the IP address used for the system.
Sequence:
set ip address [123.123.123.123] press Enter
where
[123.123.123.123] is in decimal dot notation.
The system responds:
System IP address: [123.123.123.123]]
set subnet mask Sets the subnet mask used for the system.
Sequence:
set subnet mask [123.123.123.123] press Enter
where
[123.123.123.123] is in decimal dot notation.
The system responds:
System subnet mask:[123.123.123.123]
set default gateway Sets the default gateway parameter for the system. The default router
must be an IP address specified in decimal-dot notation, e.g.,
192.168.0.1.
Sequence:
set default gateway [123.123.123.123] press Enter
where
[123.123.123.123] is in decimal dot notation.