User's Manual

Description
23
Version 1.0
4.5. Set AirPair Custom Frequency Settings
This section details how to set the frequency channels for user-defined custom
frequency pairs, i.e., decoupled frequencies, and how to set the gain.
Procedure 4-4
Setting the 24GHz AirPair Frequency channels for user-defined custom
frequency pairs
Perform this procedure to set the 24 GHz AirPair frequency channels for user-
defined custom frequency pairs (decoupled frequencies) and to set the gain.
Notes:
1. The system must first be programmed with coupled frequencies (pre-
defined frequency pairs) before it may be changed to CUSTOM
frequency.
2. It is recommended you use the pre-defined coupled frequency pairs
for 24 GHz. The custom frequency combinations are available to
address potential future interference issues.
3. To perform this procedure, you must have NOC user rights.
Required Action Steps
login as a NOC user Logs in as an NOC user.
Sequence:
Enter an NOC username:
username: <username> press Enter
Enter an NOC password:
password: <password> press Enter
get radio band Displays the type (band) of radio that the user expects to connect to the
modem.
Sequence:
get radio band press Enter
The system responds:
Selected Radio Band: [None/un24]
set radio band
[ None/ un24]
Sets the band of radio to which the user expects to connect the modem.
Sequence:
set radio band UNL24 press Enter
The system responds:
Radio Band Selected: [None/ un24]