www.dragino.com HP0D Full Hotspot for Helium User Manual Document Version: 0.1 Firmware Version: Version 0.
www.dragino.com Table of Contents 1 2 Introduction .............................................................................................................................. 3 1.1 What is HP0C .............................................................................................................................. 3 1.2 Specifications.............................................................................................................................. 3 1.3 Features ..................
www.dragino.com 1 Introduction 1.1 What is HP0C The HP0C is a light hotspot for Helium. User can connect their sensors to Helium network via HP0C. 1.2 Specifications Hardware System: Linux Part: Orange Pi 4 Interface: 10M/100M RJ45 Ports x 1 LoRaWAN Wireless Operating Condition: 1.
www.dragino.com 1.
www.dragino.com 2 2.1 How to use Get IP Address Connect the HP0D Ethernet port to your router and HP0D will obtain an IP address from your router. In the router’s management portal, you should be able to find what IP address the router has assigned to the HP0D. You can use this IP to connect the WEB UI or SSH access of HP0D. 2.
www.dragino.com 2.6 Start Hopping script systemctl stop draginofwd ./Hopping_Script.sh Ctrl + c # Stop draginofwd #Start the hopping script #Stop the Hopping script Modify the hopping script nano ./Hopping_Script.
www.dragino.com 3 Manufacturer Info Shenzhen Dragino Technology Development co. LTD Room 202, Block B, BCT Incubation Bases (BaoChengTai), No.8 CaiYunRoad LongCheng Street, LongGang District ; Shenzhen 518116,China 4 FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
