User Manual

www.dragino.com
RS485 to LoRaWAN Converter User Manual 25 / 29
AU915 is similar. Below is the AU915 Uplink Channels.
CHE
AU915 Uplink Channels(125KHz,4/5,Unit:MHz,CHS=0)
0
ENABLE Channel 0-63
1
915.2
915.4
915.6
915.8
916
916.2
916.4
916.6
Channel 0-7
2
916.8
917
917.2
917.4
917.6
917.8
918
918.2
Channel 8-15
3
918.4
918.6
918.8
919
919.2
919.4
919.6
919.8
Channel 16-23
4
920
920.2
920.4
920.6
920.8
921
921.2
921.4
Channel 24-31
5
921.6
921.8
922
922.2
922.4
922.6
922.8
923
Channel 32-39
6
923.2
923.4
923.6
923.8
924
924.2
924.4
924.6
Channel 40-47
7
924.8
925
925.2
925.4
925.6
925.8
926
926.2
Channel 48-55
8
926.4
926.6
926.8
927
927.2
927.4
927.6
927.8
Channel 56-63
Channels(500KHz,4/5,Unit:MHz,CHS=0)
915.9
917.5
919.1
920.7
922.3
923.9
925.5
927.1
Channel 64-71
5.4 How to set up RS485-LN to work with Single Channel Gateway such as
LG01/LG02?
In this case, users need to set RS485-LN to work in ABP mode & transmit in only one frequency.
Assume we have a LG02 working in the frequency 868400000 now , below is the step.
Step1: Log in TTN, Create an ABP device in the application and input the network session key
(NETSKEY), app session key (APPSKEY) from the device.
Note: user just need to make sure above three keys match, User can change either in TTN or Device to make then
match. In TTN, NETSKEY and APPSKEY can be configured by user in setting page, but Device Addr is generated by
TTN.