User Manual

www.dragino.com
LTC2 LoRaWAN Temperature Transmitter 5 / 32
 Datalog and retrieve via LoRaWAN
 Use pre-load PT100 probe or 3rd PT100 probe
 Factory calibration for different resistance range
 Support accuracy measure of resistance and upload
 Battery Monitoring and upload
1.3 Applications
 Logistics and Supply Chain Management
 Food management
 Cold chains solution
 Industrial Monitoring and Control
1.4 Hardware Change log
LTC2 v1.0: Release.
1.5 Pin Definitions and Switch
1.5.1 Jumper JP2 ( Power ON)
Put a jumper on JP2 will power on the LTC2.
1.5.2 LED
The LED will flash in below case.
1) Send an uplink packet