User Manual

www.dragino.com
LTC2 LoRaWAN Temperature Transmitter 25 / 32
Temp2=-327.67
80216E0 systime= 2021/5/16 04:57:44 1 3684 Temp1=28.36
Temp2=-327.67
80216F0 systime= 2021/5/16 05:17:44 1 3685 Temp1=28.32
Temp2=-327.67
Start Tx events
OK
Downlink Command:
No downlink commands for feature
3.15 Print last few data entries.
Feature: Print the last few data entries
AT Command: AT+PLDTA
Command Example
Response
AT+PLDTA=5
Print last 5 entries
Stop Tx events when read sensor data
1 systime= 2021/5/17 03:12:37 1 3681 Temp1=26.01 Temp2=-327.67
2 systime= 2021/5/17 03:17:37 1 3682 Temp1=26.02 Temp2=-327.67
3 systime= 2021/5/17 03:22:37 1 3687 Temp1=25.94 Temp2=-327.67
4 systime= 2021/5/17 03:27:37 1 3684 Temp1=25.95 Temp2=-327.67
5 systime= 2021/5/17 03:32:37 1 3684 Temp1=26.20 Temp2=-327.67
Start Tx events
OK
Downlink Command:
No downlink commands for feature
3.16 Clear Flash Record
Feature: Clear flash storage for data log feature.
AT Command: AT+CLRDTA
Command Example
Function
Response
AT+CLRDTA
Clear date record
Clear all stored sensor data…
OK
Downlink Command: 0xA3
 Example: 0xA301 //Same as AT+CLRDTA