Data Sheet

Open Source LoRa WiFi Gateway
LG01
OVERVIEW:
WWW.DRAGINO.COM
[e-mail]
Dragino Technology Co., Limited
Room 7009, Zi'An Commercial Building, Qian Jin 1 Road.
Xin'An 6th District, Bao'an District ; Shenzhen 518101,China
Direct:[phone] |Fax:[phone]
The LG01 is an open source single channel LoRa Gateway. It lets you bridge LoRa wireless
network to an IP network via WiFi, Ethernet, 3G or 4G cellular.
LG01 runs Open Source OpenWrt system, user are free to modify the source file or
compile the system to support their customized applications.
Features:
Open Source OpenWrt system
Low power consumption
Firmware upgrade via Web
Software upgradable via network
Auto-Provisioning
Built-in web server
Managed by Web GUI, SSH via LAN or WiFi
Support WiFi AP, Client or Ad-Hoc(Mesh) mode
Internet connection via LAN, WiFi, 3G or 4G
Failsafe design provides robustly system
Interfaces:
Processor: 400MHz, 24K MIPS
WiFi : 802.11 b/g/n
Power Input: 12V DC
10M/100M RJ45 Ports x 2
USB 2.0 host connector x 1
LG01 has WiFi interface, Ethernet port and USB host port. These Interfaces provide flexible
methods for users to connect their sensor networks to Internet.
LoRa band available at 433/868/915/920 Mhz
LG01-P
LG01-S (Sensor Version)
Specifications:
Linux Side:
MCU/LoRa Side:
Flash: 16MB ; RAM: 64MB
MCU: ATMega328P
Flash:32KB, RAM:2KB
LoRa Chip: SX2176/78
USB 2.0 host internal interface x 1
LoRa Wireless
14 pos screw terminal (LG01-S)
Arduino IDE compatible. Easy to program.
Max range in LoRa: 5 ~ 10 km
3G/4G module (optional)