User Manual

www.dragino.com
LoRa Gateway User Manual ---Update:2017-11-07 60 / 67
12.6 Can I make my own firmware for LG01? Where can I find the source code of
LG01?
Yes, User can make own firmware for LG01 for branding purpose or add customized application.
The LG01 source code and compile instruction can be found at:
https://github.com/dragino/openwrt-cc-15.05
12.7 How to get more examples for this device?
We keep releasing Arduino Examples in the Dragino examples directory under Arduino IDE. If
user install the dragino board earlier and we have release new examples. The new ones won’t
show up in the IDE except the user update the board profile. To update, User can remove the
board profile in Arduino board manager and install it again.
12.8 What is the Antenna require for OLG01?
The OLG01 shipped with a small LoRa Antenna inside the box as attached:
User can use this Spring Antenna for testing purpose. For field deployment, user can replace it
with high performance outdoor antenna such as fibre-glass epoxy antenna. when choose
antenna, please make sure the antenna works with the LoRa frequency for the device.
12.9 More FAQs about general LoRa questions
We have keep updating more FAQs in our WiKi about some general questions. The link is here:
http://wiki.dragino.com/index.php?title=LoRa_Questions
A spring antenna for
test purpose