User manual

Draco major
74 2014-04-15
5.3.3 Switch
You can configure the parameters for the matrix configuration in this
menu.
You have the following possibilities to access the menu:
You can select between the following settings:
Field Selection Description
Y (Yes) The user can switch the video signal
from any CPU to his monitor (observer).
Keyboard/mouse control is not possible.
Note:
Switching with the key <Space> and not
<Enter>.
The operator will not be informed if
further users connect as an observer to
the CPU that is connected to his
console.
Allow Sharing
N (No)
Function not active (default)
Y (Yes) The User can connect to every single
CPU as an operator, even to such ones
that are related to another user. The
previous user is set to observer status.
Note: To share K/M control Force
Connect has to be activated.
Force
Connect
N (No)
Function not active (default)
Y (Yes) Extension of 'Force Connect': If the user
connects to a CPU as an operator that
is already related to another user, the
connection to the previous user will be
completely disconnected.
Note: To share K/M control Force
Disconnect has to be deactivated.
Force
Disconnect
N (No)
Function not active (default)