User manual

Draco major
68 2014-04-15
Field Selection Description
Y (Yes) Save the current configuration of the
matrix in the flash memory periodically.
Auto Save
N (No)
Function not active (default)
Y (Yes) Send echoes of all switching commands
done by the matrix.
Enable
COM Echo
N (No)
Function not active (default)
Y (Yes) Reject commands via external interfaces
(RJ45, RS232) during OSD is open.
Lock
COM Ports
N (No)
Function not active (default)
Baud rate
kBaud
Numerical
value
Select a predefined Baud rate for the
serial control (default: 115.2 kBaud).
Y (Yes) Synchronize the slave matrix according
to the settings of the master matrix.
Slave Matrix
N (No)
Function not active (default)
Master IP
Address
Numerical
value
Set the network address of the master
matrix (default: 0.0.0.0).