User manual

Configuration
2014-04-15 141
6.5.2 Reset
You have the following possibilities to access the menu:
If a firmware update has been done since the delivery, the matrix will be
set to the state defined there.
OSD
 Select Configuration > Reset in the main menu.
If you select the option Reset, the Draco major will be set back into
delivery status.
LCD Display
 Select Configuration > Reset in the main menu.
If you select the option Reset, the Draco major will be set back into
delivery status.
6.5.3 Power Down
 Press the 'On' and 'Off' button at the standard appliance outlet to
power on and power off the matrix.