User manual

Draco vario DVI KVM Extender

The 'Hot Key' sequence to enter Command Mode can be changed. The

following table lists the 'Hot Key' Codes for the available key sequences:

'Hot Key' Code 'Hot Key'

0 Freely selectable (from 2012-01-12)

2 2x <Scroll>

3 2x <Left Shift>

4 2x <Left Ctrl>

5 2x <Left Alt>

6 2x <Right Shift>

7 2x <Right Ctrl>

8 2x <Right Alt>

Set freely selectable 'Hot Key' (exemplary)

In order to set a freely selectable 'Hot Key' (e.g. 2x <Space>), use the

following keyboard sequence:

Reset 'Hot Key'

In order to set a 'Hot Key' back to default settings of the extender, press

the key combination <Right Shift> + <Del> within 5 s after switching on the

CON Unit or plugging in a keyboard.

Pos: 69 /806-IHSE/Konfi guration/USB-HID- Ghosting/K477_ USB-HID-Ghosting @ 9\mod _1362404683851_6.doc @ 71192 @ 2 @ 1

5.4 USB-HID Ghosting

This function allows specific keyboard and mice descriptors (device

descriptions) to be permanently stored in the CPU unit. This eliminates the

need to register and deregister the keyboard and mouse on an operating

system each time there is a shared use of a source (computer, CPU) by

two or more consoles within a KVM matrix.

50 2014-11-11